Pharmatest

PTB111E Manual Tablet Hardness Tester

Tablet hardness tester for measuring hardness alone

Important note about the calibration:

The current USP Pharmacopeia requires that the (strength) sensor of a tablet hardness test instrument be calibrated periodically over the entire measurement range (or the range for measuring the samples) with an accuracy of 1N. All PharmaTest tablet hardness test instruments can be statically calibrated over the entire measurement range using various counterweights.

All instruments support control of at least three different reference points during calibration to check the linearity of the (force) sensor. Additionally, PharmaTest offers the PT-MT magnetic tablet to calibrate the breaking point detection of the entire instrument (force sensor and the instrument mechanics).

All PharmaTest tablet hardness testers fully meet the requirements of the current USP Pharmacopeia.

 

PTB-111E Tablet Hardness Tester

The PTB 111E is used to test the hardness of all tablets up to 300 or 500 Newton (Optional). The PTB 111E is equipped with a COM port for data transfer and a Printer port for printing the results. The test result is displayed directly on the device’s LED display. The load cell can be calibrated and 3-point calibration menus are available. The instrument meets the latest requirements of EP and USP monographs.

Depending on the tablet hardness, you can manually test 6 to 10 samples per minute. The user enters a nominal hardness and presses the – test. When all the data have been collected, press the Test it and you will get the results, including statistical data, printed on the connected printer.

The automatic restart option makes it possible to test faster and provides a higher throughput of the samples compared to a manual Start procedure.

 

Characteristics

  • Fully compliant with USP and EP , dual mode instrument with linear speed increase and linear force increase
  • Built-in multi-point validation procedure
  • Programmable print-out of force increase curve
  • Test set for
  • Tension test of oblongs and tablets available
  • Automatic restart for test
  • samples available
  • IQ/OQ documents included free of charge
Contact with Prolyse

Would you like to receive a free quote or have any questions? Please contact us via:

Phone: +31 (0)162 383100 or click here for the contact form.

+31 (0)162 383100

About Prolyse

Prolyse BV is a company located in Heerle, North Brabant, the Netherlands, close to the Belgian border. We were founded in 2009 and work closely with agents, dealers, freelancers and suppliers. We often work with a flexible team.

Services

We provide our services in analytical chemistry, process industry, pharmaceutical and life science laboratories.

Read more

Support

We offer a high level of service and support that you can expect, even after the warranty period!

Read more

Satisfied customers

A recommendation from a satisfied customer is absolutely the best reference; it is our absolute conviction!!” We have customers in the BeNeLUX countries, Ireland, Germany, the Czech Republic and even in Asia.

Read more

Do you have a project?
Let's talk & Making a success of your project

We are ready to help you. Our expert is there, just send a message.