This is the area for powder testing instruments for determining, among other things, the density of powders such as metal powders, compounds, pigment with impact angle, flow rate and more. Prolyse BV is the exclusive dealer of PharmaTest products for the Benelux countries.
Overview
The PTG-S4 powder characterization instrument is used to test the behavior of powders and granules in order to reduce production costs and ensure quality and consistency of the final product.
PTG-Series
This instrument is suitable for testing the flow time of powders and granules, measuring the cone angle (angle of repose) of the collected powder cone, determining the weight, calculating the density and the volume of the powder cone. Additionally, the EP/USP “flowability” by measuring the flow time of 100 grams of the sample through a specific pouring nozzle (with a certain opening).
PTG-S4 Automatic powder characterization
The automated PTG-S4 powder tester is used to measure the flow behavior of granules and powders in accordance with current EP and USP pharmacopoeia as well as with the international ISO 4324 standards.
This instrument is suitable for testing powder flow time, measuring the cone angle (angle of deposition) of the collected powder on a platform. Additionally, a Powder Flow Chart is printed. During the weight measurement, the powder density is calculated as well as the so-called Cone Angle. The EP “Flowability” is the flow time of 100 grams of the sample by pouring it into a specific mouthpiece (various sizes are available) with stirring with a certain spoon. It is equipped with a built-in Sartorius balance range 1 – 350 mg, accuracy 1.0 mg, and a built-in printer.
Why are the flow properties of powder – forms – measured?
It is estimated that more than 50% of the materials used in all industrial applications are in powder form at some point/stage. These powders must be transported, injected, propelled, and undergo various process stages before they take their final form. This final form can be a tablet, a solution, or even a powder formulation. The need for research, regulation, or control for a reproducible powder flow is present in many industrial applications.
ptg-s3-balance
Some applications for powder characterization:
- Incoming control of raw materials
- Control of production costs
- Ensure quality and consistency of products
- Research product quality of different suppliers
- Design new production techniques
- Research on the effect of humidity
- and so on and so on.

